DPA-10

• Monitors Entry to Pool/Spa Areas
• Listed per U.L. 2017
• Microprocessor Controlled
• Battery Operated
• Low Battery Indicator
• Exceeds Operational Requirements of Model Barrier Codes
• Surface Mount

Part Numbers

• DPA-10 Instant On
• DPA-10D 7 Second Delay

The GRI DPA-10 Series Pool Alarms operate on a 9 volt battery. U.L. requires that a Duracell alkaline battery Model MN1604 be used. Both units will operate at any voltage of 5-15 volts maximum. 12 volts is recommended to prevent sounder volume from dropping below minimum sound pressure levels of 85dB at 10’.